Temco's air interlacing jets are suitable for all textile processes and various applications, providing both a productivity increase and high yarn quality.
State-of-the-art quality control ensures a continuously high-quality standard which is of paramount importance for products used in large numbers.
Temco provides the tanglelacing jet LD32 in modular design to comply with the requirements for ever-increasing thread speeds for processing technical yarns, e.g. glass fiber and carpet yarns.
The Temco LD32 fits on all spindraw texturing machines known on the market for initial equipment or upgrading. These jets are suitable to process yarns up to dtex 10 000 at thread speeds of up to 4 000 m/min depending on the relevant titer. Suitable material allows a good reproduction of geometry, shape and surface of air and thread ducts, while ensuring a high uniformity.
The interchangeable ceramic inserts allow to set either hard, soft, short or long knots in line with the requested tanglelacing.
Thanks to the tandem layout of the air interlacing jet LD4, it is possible to optimize the tangling effect, even at highest yarn speeds.
The LD4, which incorporates the field-proven engineering and technology of the LD32 jet, has been especially designed for high-duty Bulked Continuous Filament (BCF) installations. It can also operate on other machines to produce Continuous Filament (CF) yarn, Partially Oriented Yarn (POY), Fully Drawn Yarn (FDY) and Highly Oriented Yarn (HOY).
Yarn speeds of up to 7 000 m/min can be achieved depending on the yarn type and requirements placed on the tangling quality. This results in an increase of approximately 50% compared to the LD32.
With amortization in just under six months, the LD4 jets are an appealing and cost-effective investment.
Temco has designed the tangling jet LD5 incorporating the field-proven engineering and technology of jet LD32 to meet the market requirements. The LD5 jet is meant to operate on winders as well as on air tangling installations, air texturing machines and spinning machines to process in tangled condition flat and textured single and multiple yarns.
Special application fields cover winders for Bulked Continuous Filament (BCF) yarns, for textile areas for instance in carpets, extending also to single, multiple and blended yarns for industrial applications. Titers up to dtex 10 000 can be handled. A further interesting application field for the LD5 is the manufacture of inorganic materials such as glass fibers. There are various jet inserts available with different air ducts to suit the yarns and titers in processing. The insert itself is made of high-resistant ceramics.
Find the sales and service contacts for your country here.